Vertex Series AR-15
sales@brdgunworks.com
Vertex
The BRD Gun Works Vertex AR rifle brings features not found in other mid-level predator hunting rifles. From small details such as aggressive textured controls for easy manipulation in all environmental conditions with or without the use of gloves to the A5 buffer system that increases the reliability and performance by providing for more consistent cycling, a reduction in felt recoil, and by reducing wear on critical components. Fitted with a quality 416R stainless steel barrel that will provide Sub-MOA accuracy with match grade ammunition. The same meticulous attention to detail, and reliability and accuracy enhancements go into the Vertex that are also in the upper tiers of BRD AR rifles.
• 7075-T6 billet receivers provide strength and rigidity in areas crucial for accuracy and precision. A precision broached magazine well with beveled feed lips aid in easy loading of magazines in all lighting conditions, while the contoured trigger finger rests on each side of the magwell provide for natural finger placement in line with the trigger. The Integrated large opening trigger guard allows for easy access with gloves.
• 6061-T6 slim rail with M-LOK slots.
• BRD Enhanced BCG with a bolt that is headspaced to the barrel. The carrier is nitride coated, the gas key has been faced and sealed to the carrier, OCK gas key screws installed and properly torqued, gas key is hand staked, the ejector has been chamfered and polished, the extractor hook face has been polished, and Springco extractor and ejector springs have been installed.
• Barrels are an SPR contoured 416R stainless match grade barrel with button cut rifling and a bolt that has been headspaced to the barrel.
• An SLR nitride adjustable gas block allows for easy and concise regulation of the gas system allowing you to fine tune your rifle/load for a smoother shooting rifle. Especially when shooting suppressed.
• Optimized A5 buffer system that increases the reliability and performance by providing for more consistent cycling, a reduction in felt recoil, and by reducing wear on critical components.
• A BCM Gunfighter SOPMOD MOD-0 stock provides for a pronounced cheekweld and snag free design. No sharp edges prevent tangling of the rifle with your other gear.
• BCM Gunfighter Mod 3×3 ambidextrous charging handle provides larger latches for easier use with thermal optics.
• Single Stage Timney Impact AR 3lb trigger
• Ergo Sure Fire AT grip that provides for a more ergonomical grip over a standard hard polymer grip. This grip is made from rubber and is very comfortable.
• DuraMag SS magazine
Rear Charge Starting at: $2756.70
Note: All prices include single color cerakote coating. Any additional Cerakote colors and patterns are an additional fee. Shipping is not included in the price. The Vertex is built to order.
Vertex Pro
The BRD Pro rifles are the flagship model of our predator hunting rifles. Born from the concept that a predator hunting rifle should blend both performance and precision, the BRD Pro rifles combine facets of a competition PRS rifle and a hunting rifle in a package that provides superb shootability. This is the first rifle that BRD offered to predator hunters. Its conception came from my personal competition rifle and from the testing and feedback of serious coyote tournament hunters.
Vertex Pro upgrades:
• A lightweight, but rigid SLR rail reduces overall weight while still providing a solid platform for an ARCA Swiss mounting plate.
• The BCG is comprised of a JP Enterprise Low Mass carrier with a bolt that has been headspaced to a 416R barrel. This carrier has 100% bearing surface to aid in smoother operation, and reduces felt recoil and less movement during cycling to aid the shooter in being able to stay on target.
• Barrels are 416R stainless steel match grade with button cut rifling. A headspaced bolt is provided with the barrel and a muzzle thread protector installed.
• Your choice of a B5 Precision stock or a Magpul PRS Lite stock. The PRS Lite skeletonized version of the PRS Gen 3 stock that brings a reduction in weight while retaining strength and full adjustability. While the B5 Precision stock takes all the stability of a fixed stock, combines it with the versatility of an adjustable carbine stock, and includes full adjustability.
• Your choice of a HiperFire Eclipse, Calvin Elite 1.5lb single stage trigger or an adjustable Triggertech Diamond 1.5-4.0lb trigger.
• Forward Controls Design ambidextrous 50° short throw selector that is smooth and very durable. With very minimal movement of the levers you positively know what position it is in without looking.
• Forward Controls Design QD end plate that is made from 4140 steel.
• Forward Controls Design castle nut that allows for the staking to displace more material into the notches by being longer and deeper.
• Geissele Maritime extended bolt catch allows for easier location and manipulation with or without gloves.
• Radian Raptor LT ambidextrous charging handle on rear charging rifles.
Rear Charge Starting at: $3654.03
Side Charge Starting at: $3846.61
Note: Nyx, premium match barrel upgrade available- $375.00. All prices include single color cerakote coating. Any additional Cerakote Colors and Patterns are an additional fee. Shipping is not included in the price. The Vertex Pro is built to order.
Vertex Nyx
The Nyx is the newest model that has been released by BRD. It has replaced the popular BRDGW Elite model. Enhancements were made to improve the rigidity of the rifle, while maintaining a weight very similar to the Elite model. We have replaced the carbon fiber barrel with a 416R custom heavy profile and fluted barrel that starts as a premium match blank. This provides multiple advantages to consistency and precision, while maintaining a weight that’s similar to the previous carbon fiber barrels.
• A lightweight, but rigid SLR rail reduces overall weight while still providing a solid platform for an ARCA Swiss mounting plate.
• The BCG is comprised of a JP Enterprise Low Mass carrier with a bolt that has been headspaced to a 416R barrel. This carrier has 100% bearing surface to aid in smoother operation, and reduces felt recoil and less movement during cycling to aid the shooter in being able to stay on target.
• Barrels are a custom profiled and fluted 416R stainless steel premium match barrel with button cut rifling and a bolt that has been headspaced to the barrel.
• An SLR titanium adjustable gas block allows for easy and concise regulation of the gas system allowing you to fine tune your rifle/load for a smoother shooting rifle.
• Optimized A5 buffer system that increases the reliability and performance by providing for more consistent cycling, a reduction in felt recoil, and by reducing wear on critical components.
• Smoke Composites carbon fiber adjustable stock that greatly reduces weight while retaining full adjustability. It also includes a carbon fiber cheek riser and enhanced rubber buttpad.
• Smoke Composites Carbon fiber end plate and castle nut.
• Your choice of a HiperFire Eclipse, Calvin Elite 1.5lb single stage trigger or an adjustable Triggertech Diamond 1.5-4.0lb trigger.
• Forward Controls Design ambidextrous 50° short throw selector that is smooth and very durable. With very minimal movement of the levers you positively know what position it is in without looking. It also provides you with the ability to run either length of levers on either side for ultimate comfort to fit your style of shooting.
• Geissele Maritime extended bolt catch allows for easier location and manipulation with or without gloves.
• Geisselle Super Charging Handle ambidextrous charging handle on rear charging rifles.
• Ergo Sure Fire AT grip that provides for a more ergonomical grip over a standard hard polymer grip. This grip is made from rubber and is very comfortable.
Rear Charge Starting at: $4264.50
Side Charge Starting at: $4444.38
Note: Smoke Composite carbon fiber grip upgrade available- $160.00. All prices include single color cerakote coating. Any additional Cerakote Colors and Patterns are an additional fee. Shipping is not included in the price. The Vertex Pro is built to order.